Golf Etiquette and Player Responsibilities
Driving Range Etiquette - Leave the Preferred Divot Pattern
So what's the best way to maintain the turf at the practice range. Besides rotating the tee stalls and performing turf management solutions part of the overall equation resides with the golfers. Since randomly scattering divots can quickly destroy a practice range tee, the better approach is to shrink one’s divots by removing them in a pattern just like the professionals. More specifically, this includes placing each shot directly behind the previous divot. This can easily be repeated for up to 10 shots resulting in much less turf being removed.
Although divots come in all sizes, the average iron shot is believed to remove a divot 3 inches wide by 6.5 inches long for a total of 19.5 square inches. After just 30 shots, or a small bucket of balls, 4.1 square feet of turf are removed, given a typical practice routine (30 shots x 19.5 in2 = 585 in2 / 144 in2 = 4.1 ft2). Therefore, after an entire season, 205,000 square feet of divots are removed from the tee. That's more than 4.6 acres of turf from their 1.25-acre surface.
If instead each shot is played directly behind the previous divot, subsequent divots are reduced to an average size of 3 inches wide by 3 inches long, or 9 square inches. After 30 shots, this pattern removes only 2.1 square feet of turf. (As the first divot removes 19.5 square inches and the subsequent 9 divots remove 9 square inches each for a total of 81 square inches, a total of 100.5 square inches is removed for every 10 shots, which is typical for this linear pattern. For 30 shots or a small bucket of balls, 3 x 100.5 = 301.5 in2 / 144 in2 = 2.1ft2 are removed.) If everyone adopted this method, the annual number of divots removed would be reduced from 205,000 square feet to just 105,000 square feet. That’s nearly a 50% reduction in the amount of turf removed.
Implementing this simple divot pattern into your practice regime has significant season-long implications at your facility. So, rather than voice a complaint about the turf during oppressive conditions in July and August, do the turf a favor and practice like a pro! Take a look at the short video below that shows the preferred way to use the practice tee.
Although divots come in all sizes, the average iron shot is believed to remove a divot 3 inches wide by 6.5 inches long for a total of 19.5 square inches. After just 30 shots, or a small bucket of balls, 4.1 square feet of turf are removed, given a typical practice routine (30 shots x 19.5 in2 = 585 in2 / 144 in2 = 4.1 ft2). Therefore, after an entire season, 205,000 square feet of divots are removed from the tee. That's more than 4.6 acres of turf from their 1.25-acre surface.
If instead each shot is played directly behind the previous divot, subsequent divots are reduced to an average size of 3 inches wide by 3 inches long, or 9 square inches. After 30 shots, this pattern removes only 2.1 square feet of turf. (As the first divot removes 19.5 square inches and the subsequent 9 divots remove 9 square inches each for a total of 81 square inches, a total of 100.5 square inches is removed for every 10 shots, which is typical for this linear pattern. For 30 shots or a small bucket of balls, 3 x 100.5 = 301.5 in2 / 144 in2 = 2.1ft2 are removed.) If everyone adopted this method, the annual number of divots removed would be reduced from 205,000 square feet to just 105,000 square feet. That’s nearly a 50% reduction in the amount of turf removed.
Implementing this simple divot pattern into your practice regime has significant season-long implications at your facility. So, rather than voice a complaint about the turf during oppressive conditions in July and August, do the turf a favor and practice like a pro! Take a look at the short video below that shows the preferred way to use the practice tee.
